Key Technologies of Internet IP Source Address Validation
Internet IP Source Address Validation technologies are developed by Tsinghua University. The technologies of SAVA have been listed in RFC standards by the Internet Engineering Task Force (IETF), and realized large-scale deployment through China Education and Research Network (CERNET/CERNET2). The objective of the technologies is to remedy the security defects of current internet architecture. Source Address Validation technologies are designed for both IPv4 and IPv6, but is especially focused on next generation internet with IPv6. A Source Address Validation Architecture (SAVA) has been put forward, and the key technologies of Source Address Validation in Access Network, Intra-AS, and Inter-AS have been proposed. The trackback of true user identification can be realized using Source Address Validation. The key technologies of SAVA are as follows:
1. Source Address Validation Architecture: It implements source IP address validation at three levels: Access Network source address validation, intra-AS source address validation, and inter-AS source address validation. It forms a “multiple-fence” source address validation framework with different granularities.
2. Source Address Validation in Access Network: A method based on synchronizing the address usage status between the validation device (access switch), the host and the system of address allocation. It is designed to filter forged packets on the switch ports with a filtering table, which is established and maintained by methods like monitoring the control messages. It solves the problem of validation of source address in Access Network with host granularity, supporting various IPv6 and IPv4 address allocation modes. New network devices and systems such as "Source Address Validation Improvement switch (SAVI switch)" have been developed.
3. Source Address Validation at Intra-AS: An algorithm of calculating and establishing filtering table by using complete or incomplete path information to achieve maximized filter capacity. It is designed to filter forged messages on the switch ports. It solves the problem, in an IPv6 or IPv4 AS, of the validation of source address with prefixgranularity. New network devices and systems such as "Intra-AS (campus network) true source address validation management system" have been developed.
4. Source Address Validation in Inter-AS: This is a multistep process that establishes a trusted alliance between autonomous systems (ASs) , generates a tag for the prefix of each AS belonging to the alliance by exchanging tag seeds, adds the verified tag corresponding to the prefix of the source address in the packets, and checks the correctness of the tags in the packets at the border routers of source and destination ASs, which filters the forged packets. It solves the problem, between IPv6 and IPv4 autonomous systems, of the validation of source address with AS granularity. New network devices and systems such as " kernel router for Inter-AS source address validation" and " Inter-AS source address validation management system and controller system" have been developed.
5. Traceback for real user identification based on Source Address Validation: The true source address validation technologies are used in the network information traceback and user real identification registration management. Based on the application interfaces supported by source address validation, the user management and security incident traceback based on a tuple with five factors (user ID, IP address, MAC address, switch port, online time) has been realized. The "SAVI network management system", "user identification and management system based on true source address", etc. have also been developed.
For the "key technologies of source address validation", there are significant achievements in the following four aspects:
1. Internet Source Address Validation Architecture: The innovation is adapting to the existing internet operation and management system on the whole, and meanwhile focusing on different levels’ targets and features. The architecturec includes three levels: Access Network source address validation, intra-AS source address validation, and inter-AS source address validation. The architecture will instruct the source address validation in the three levels for different granularities respectively. This architecture has been listed as international standard RFC5210 by Internet Engineering Task Force (IETF), promoting the IETF to build a specific work group SAVI and leading the development of a variety of international standards.
2. Access Network source address validation algorithm that synchronizes the dynamic address status: An universal algorithm to validate the authenticity of the IP address of each host computer, while in Access Network using different IP address allocation modes, has been designed . Compared with other proposals in the IETF SAVI work group, this algorithm achieves accurate synchronization of address status, without a coordination mechanism, under various IPv6 and IPv4 address allocation modes and lays an important technical foundation for the identification of real user and network information traceback. This validation algorithm has been realized in several dozens of switches made in China and broadly deployed in the campus networks of 100 colleges.
3. Source Address Validation mechanism for Intra-AS by calculating legitimate path: In an AS with dynamic routing changes, a subnet address authenticity validation mechanism was designed to eliminate misjudgment and avoid missed judgment in a non-universally deployed environment. Compared with foreign technologies, such as uRPF and SAVE, this mechanism solves the problem of inconsistency between the statuses of the filter table and actual router caused by uncertain router information. Therefore, this avoids the misjudgment and missed judgment in the process of intra-AS true source address validation. This validation mechanism has been realized in the software system developed by related companies and broadly deployed in the campus networks of 100 colleges.
4. Source Address Validation protocol for Inter-AS based on conveying trusted relationship: Under the circumstance that no trusted system has been established in the global internet, an inter-AS true source address validation protocol used for building and conveying trusted relationship between two ASes has been designed. Compared with the foreign technologies, such as uRPF and IDPF, this protocol supports large scale inter-connection between ASes without impact from the dynamic routing changes and trust relation changes between ASes. It can go through non-deployed areas, which is good for incremental deployment. This validation protocol has been realized in routers and specific devices made in China and deployed in the CNGI-CERNET2 backbone network, a demonstration network of China's next-generation internet (CNGI) project.
The above-mentioned technical achievements are of great significance to and will have far-reaching effects on the development of the Internet.
(release date:2018-12-05)